Activated carbon At present, it has been widely promoted and used in environmental pollution prevention, industrial processes, people's livelihood purposes, and has achieved certain results. However, it is a pity that after the carbon has been saturated and replaced by adsorption, it is either buried, discarded or incinerated. In fact, these carbon adsorbed a large amount of substances can be reused.
We all know that in addition to creating benefits, an enterprise must learn to control costs. The adsorption of carbon is mainly through physical action, so we can use high heat and steam to desorb the impurities of waste carbon, so that it can regain its previous adsorption capacity and can be reused for many times. Generally speaking, this method can save 45% of the cost compared with the purchase of new products. This kind of technology has been used for many years and has developed very well. Their technology can usually recover performance of more than 95%
However, we always have this wrong idea in our mind. The reprocessed activated carbon will have different quality and poor effect. These ideas are all because there are many false carbon manufacturers hiding in the market. They use untreated waste carbon to counterfeit recycled carbon, which has caused many users' problems. However, they have misunderstandings about recycled carbon. In the process of packaging finished products, the key step is to conduct heat treatment in the furnace, which must be kept at 850~950 ℃. Steam is injected into the furnace to restore the carbon to its original performance. Its principle is to pickle the waste carbon. After that, the carbon can still be reused and reused continuously. As long as you filter and remove the carbon with too small specification and add the amount of carbon lost in the process, you can save a lot of carbon purchase costs.