Fruit shell activated carbon manufacturer As the shell carbon is a porous adsorption material, it shall be prevented from being soaked in water before transportation, storage and use. Immersed in water, water fills the shell hole, making the carbon specific surface of the shell directly contact with the gas, seriously affecting the use effect.

Precautions for transportation, use and storage of shell charcoal

1. Transportation and loading and unloading: During the transportation, the shell carbon shall not be dragged with iron hooks, and shall not be mixed with hard materials. It shall not be strongly vibrated, rubbed, trampled, or smashed. It shall not be thrown. It shall be loaded and unloaded gently to reduce carbon particle breakage and affect the use.

2. Installation and use: During loading, the debris and dust generated by handling shall be screened out first. Then spread it evenly layer by layer, and do not pour it directly from the feeding hole to prevent uneven filling of large and small particles, which will eventually cause gas bias and affect the use effect. At the end of filling, blow out the dust on the surface of the shell carbon before starting to prevent the dust from entering the later section after starting to affect the normal production.

3. Tar prevention: Tar viscous substances shall be prohibited from entering the shell carbon bed during use to prevent blocking the shell carbon pores or covering the shell carbon development surface, so that the gas can not contact the shell carbon development surface and lose the application effect. If the gas contains such substances, The gas shall be removed before entering the shell carbon bed (it is better to have coke removal equipment) to achieve good application effect.

4. Storage method: It should be stored in a cool and dry place to prevent the inner and outer packing bags from cracking, moisture and absorption of other substances in the air, which will affect the use effect. It is strictly prohibited to mix with toxic and harmful gases or volatile substances, and it should be stored away from pollution sources??

5. Water immersion is strictly prohibited: shell carbon belongs to porous adsorption substances, so water immersion must be absolutely prevented during transportation, storage and use. After water immersion, water fills the shell pores, reducing the direct contact between the specific surface of shell carbon and gas, which seriously affects the use effect.

6. Fire prevention: During the storage or transportation period, the shell charcoal shall be prevented from direct contact with open fire to prevent fire. During the regeneration of shell carbon, prevent oxygen from entering and completely regenerate. After tempering, it must be cooled to below 800 ℃ with steam, otherwise the shell carbon will spontaneously ignite in the presence of oxygen at high temperature.

7. Safety requirements: wet Activated Carbon Oxygen needs to be removed from the air, and consuming oxygen in a securely sealed container can be toxic. If workers enter the container containing shell carbon for proper sampling or operation in hypoxic space, they shall comply with relevant national standards and operating specifications.